PUMP-FLO is the perfect tool to select, evaluate, and analyze
centrifugal pumps using manufacturers' supplied electronic pump
catalogs. With PUMP-FLO you can be sure that the desired pump meets
your system's requirements for optimum efficiency, therefore
minimizing maintenance and pumping costs.
- Select pumps from manufacturers' catalogs that meet a design
point of Total Dynamic Head and flow rate.
- Evaluate the pump curve which shows head, efficiency,
horsepower, and NPSHr as a function of flow rate.
- Analyze multiple pump operation, calculate annual operating
cost and correct the pump curve for viscous fluid operation.
Using PUMP-FLO you can:
» Select your pump -
With PUMP-FLO you enter the design point, then select a
manufacturer's supplied Electronic Pump Catalog. Click for a list
of supporting PUMP-FLO manufacturers. Once the manufacturer's
catalog is open, PUMP-FLO displays the pump types and speeds
available. After entering your selection criteria, the program
searches the Electronic Pump Catalog and displays a list of pumps
meeting your needs. The pump selection list can be sorted by pump
size, efficiency, NPSHr, and maximum power draw to simplify your
comparison.
» Evaluate pump operation - PUMP-FLO
displays the pump curve showing the pump head, efficiency,
horsepower, and NPSHr as a function of flow rate. You can inquire
from the curve to determine the pump's operation for a given flow
rate or head value. The system resistance curve can also be
displayed on the pump curve.
» Analyze pump operation
- PUMP-FLO displays the pump curve for multiple pumps running in
either series or parallel operation. PUMP-FLO also calculates the
pump's operating cost using both fixed and variable speed pump
drives. This aids in determining if there is economic justification
for a variable speed drive. The program automatically makes
viscosity corrections to the pump curve when needed. All stages of
the selection process are documented with printed reports. PUMP-FLO
prints curves in a data sheet format as well as a full page pump
curve.
PUMP-FLO 10.0
Pricing
- Standard PUMP-FLO 10.0 Pricing $395, multiple unit discounts
available.
- Upgrade from PUMP-FLO Version 9 - $95.
- Upgrade from PUMP-FLO Version 2004 - $195
- Upgrade PUMP-FLO Version 7 - $295.
- Call 800-786-8545 for quote.
Review the engineering and calculation methods used in PUMP-FLO,
along with the engineering assumptions made.